iRobot Roomba can help you clean your home easily. You can conduct mapping runs and schedule cleaning sessions easily so your space is neat and tidy at all times. However, if there is some issue with the robot, you will find it hard to operate it. Here arises the need for having an iRobot Roomba troubleshoot guide that can help you resolve common issues easily. This blog will walk you through the steps to resolve Roomba login, and other related issues in no time.
Common issues you can face with Roomba
Some of the most common issues that you can encounter while using your roomba robot are:
- Roomba not connecting to wifi
- Roomba not charging
- Brush Spinning issues
- Error Codes
iRobot roomba troubleshoot- Steps
Roomba troubleshooting: Roomba not connecting to wifi
When your device isn’t connecting to the wireless network, it’s clear that you simply don’t have the wireless feature turned on or the web affiliation you have got is not functioning at all. Here are some extra checks you’ll got to perform:
- Take a wireless-enabled device like your smartphone or your automatic data processing system to wherever your Roomba is found and take a look at accessing the internet exploitation an equivalent network that your Roomba is connecting to.
- Check if your roomba device is placed accurately over the house base and therefore the home base is connected to power.Next, check if the lights on the Roomba device are power-driven on. If not, use the “Clean” button to wake it up. Once you’re sure that each the bottom station and therefore the Roomba device are powered on, attempt connecting to the web again.
- If your main wireless router is found a so much distance aloof from the roomba device, there are often disconnection problems resulting in “roomba not connecting to wifi” error. The lesser the gap between both devices, the additional capable the roomba can be. ensure you retain the router and the roomba device within the same room.
These steps will assist you with irobot roomba troubleshoot easily.
iRobot Troubleshooting: Roomba not charging
- Plug the charging base right into a energy outlet and affirm the indicator LED is flickering each four seconds. If it doesn’t, plug it right into a 2nd outlet. If it still doesn’t work, your Home charging base cable can be broken and could want replacement.
- If the Home Base LED is lit up however the robotic isn’t charging, there ought to be dust gathered at the charging contacts. If possible, use a gentle and dry material to clean them and plug with inside the charger again.
- Try removing the caster wheel from the charging base. Check if there’s any particles on the caster wheel because it can’t attain robots for charging pins. If you locate this sort of things, easy them off the floor the use of a gentle-bristled brush.
Brush Spinning issues
If you discover that the Brush to your iRobot Roomba isn’t always spinning, you could continually comply with a few steps to remedy the issue. You would possibly want assistance from a skilled person as those may also consist of a few dismantling exercises and help you with irobot roomba troubleshoot process.
- Remove the brushes with the aid of using disposing of the middle screw with the use of a flat head screwdriver. Next, additionally, take off the 4 screws that maintain the lowest panel intact.
- You’ll see the front brush motor and housing secured in their locations with the use of a few screws. Take off the screw that is far from the rims and you’ll see every other screw below it. This one has a plastic head and you will need to apply a unique screwdriver to do away with it.
- Once you do away with the equal, you’ll see a snap-latch on one of the ends of the Blue-coloured motor housing.
- Carefully take one part of the motor housing off. One segment of the housing may have a few gears and an electric-powered motor. The different a part of the housing may have a steel axle and extensive tools. You’ll additionally see a hexagonal piece sticking out from the opposite part of the housing wherein the facet brush is mounted.
- Check if the axle turns in the housing with the use of pliers. You will discover that the axle will spin as soon as it’s miles free of the caught tools. You can use a few tools oil to lubricate the equal after which setting it lower back in place.
Error Codes
Error Code 1: Battery Issues
Clean the robot battery and the charging contacts. You can also RESET your iRobot Roomba to complete the roomba troubleshooting process.
Error Code 2: Brush Issues
Clean the front brushes thoroughly and clean any dirt that’s clogging the wheel.
Error Code 3: Stalling
Perform a factory RESET on your roomba and recharge it.
Error Code 5: Charging Issues
Remove the yellow-colored pull tab to remove issues with the robot.
Error Code 6: Sensors
Clean the Sensors you find on the robot and RESET it to factory settings.
Error Code 17: Navigation Issues
Delete the saved Maps and run a cleaning cycle again. Try increasing the lighting and clean the charging contacts on the robot as well.
One-stop iRobot troubleshooting: RESET Roomba
If the above Roomba troubleshooting steps don’t help resolve the issues with your Roomba robot, you can always reset it to factory settings. If you reset the Roomba, the saved maps, cleaning schedules and other data will be cleared up. This will put the robot in default factory state and you will need to run everything including the setup process again.
- Press the buttons on the top of your roomba for about 15 seconds.
- After sometime, you’ll hear a tone, or see a light swirl around the buttons. Release the buttons now and allow some time for the robot to restart.
- Once the robot is back up and running, you can reconfigure the cleaning sessions again.